PRINT WHEN YOU NEED IT
No airframe stock or shipping wait. Download the files and manufacture the structure at home, then replace a damaged part or print another airframe whenever you need one.
Printable FPV aircraft
Performanceplanesprinted.
WUDFLY develops a new generation of RC aircraft, combining ultra-lightweight FPV electronics, aerodynamic engineering and real-world flight testing to create compact, highly optimised flying machines. Each aircraft is developed as a complete system — airframe, electronics, setup and documentation.
TESTED TO THE LIMITS
Real-world flight testing, not just CAD and simulation.
FULL BUILD + SETUP GUIDE
Components, print settings, assembly, CG and pre-flight setup.
AIRCRAFT-SPECIFIC INAV
Validated flight-controller starting points for supported hardware.
Why print an aircraft?
More flying. Less Shipping.
Manufacture the airframe when you need it, build around a tested setup and keep replacement-airframe costs extremely low.
BUILD FROM A KNOWN SETUP
Use tested electronics, CG guidance, print settings and aircraft-specific setup information to remove as much build and setup guesswork as possible.
LOW-COST AIRFRAMES
A 750 g roll of LW-PLA can produce roughly seven to ten 75–100 g airframes. That puts the lightweight printed shell at only a few euros each.
Why build one?
Because this is the fun part.
Small aircraft, real performance and an airframe you can print again. WUDFLY designs are made to be built, flown and pushed — not kept pristine on a shelf.
Current aircraft
Three aircraft. More on the way.
BANDIT and SPECTRE cover two very different kinds of FPV flying. TWIST_DT stays focused on relaxed line-of-sight park flying. The Hangar also shows what is currently in development.
Fast FPV wing
BANDIT
The sharper, faster FPV choice for speed, low lines, proximity and aerobatics.
198 km/h recorded20+ min recorded<249 g
Open aircraft page →
Stable FPV wing
SPECTRE
A calmer entry into FPV wings, with very stable assisted flight and a lively Acro side for gaps and proximity.
~215 g600 mmDJI O4 Wide
Open aircraft page →
LOS park flyer
TWIST_DT
A lightweight line-of-sight aircraft for relaxed cruising, easy launching and proper aerobatics when you want them.
Twin motor2S600 mm
Open aircraft page →
More on the way
CLASSIFIED and REI are already in development.
Explore the Hangar
Builder feedback · SPECTRE
From print presets to first flight.
Independent SPECTRE builder feedback on the print presets, build instructions, support and first-flight experience.
What a WUDFLY release includes
Comprehensive aircraft package.
Each release brings together the printable airframe, recommended hardware, print and build guidance, CG information and aircraft-specific flight-controller setup where supplied.
Printable aircraft files
Airframe parts, support pieces and printed details prepared for the intended build.
Known equipment setup
Recommended electronics, batteries, motors, props and supported controller options.
Build and print guidance
Practical notes based on the aircraft that were actually printed, assembled and flown.
Flight setup where applicable
CG information, control setup and flight-controller resources for supported configurations.
FREE LIFETIME UPDATES
Buy the aircraft once and future official file revisions, documentation improvements and supported setup updates for that aircraft are included at no extra cost.
Start building
START BUILDING.
Learn what printer you need, download the tested profile baseline or explore the wider design and flying resources.
Getting started
Printers, materials, print times and why printable aircraft make sense.
Read the printing guide →
Print profiles
The shared WUDFLY LW-PLA, PETG and TPU technical baseline.
Download profiles →
All resources
Design learning, DEV LAB, build support and responsible-flying links.
Open resources →
Ready to choose?
Pick a plane. Print it. Fly it.
Head to the Hangar to compare the current aircraft and find the one that matches how and where you want to fly.